Fire drill software
Fire drill software records one evacuation drill as a report the responsible person can act on: the building and its evacuation strategy, the checks made before, during and after the alarm, a timed event log, and observations that feed an action plan. AssessHub drafts the executive summary from what was actually recorded, and the assessor records the evacuation, the response, the fire safety systems and an overall result separately. It is included in the Fire Safety module on the same £100 assessor seat as fire risk assessment.
A fire drill is how a responsible person finds out whether the written evacuation arrangements work when the alarm sounds. Article 21 of the Regulatory Reform (Fire Safety) Order 2005 requires employees to be given adequate fire safety training, including what to do if there is a fire. The frequency is a judgement for the premises — quarterly, six-monthly, yearly or two-yearly — and the report is where that recommendation is written down.
£100 per assessor / month + VAT · 14-day free trial · owners, office admins and QC are free
What a drill report records
The building and the strategy
Client, address, the part of the building the drill covered, and the evacuation strategy: simultaneous, phased, progressive horizontal, stay put, defend in place, or another arrangement the assessor describes.
A suggested checklist
Pre-drill, during-drill and post-drill checks, covering the alarm receiving centre, escape routes, audibility, security locks, lifts, the fire alarm, and cause and effect. A “no” can be raised straight onto the action plan.
A timed event log
Activation, the first person out, each area clearing, the all-clear and the reset, with a time, an area and a note against each one.
Observations and an action plan
Audibility, locks, lifts, the alarm, cause and effect, means of escape and management. Each observation carries a finding, an action, photos and a video of up to 20 seconds. The ones that matter print on their own landscape action plan.
An executive summary written from the record
Draft with AI uses the checks, the event log and the observations already saved. It does not invent times, headcounts or a satisfactory result.
A clear outcome
Evacuation completion, management and occupant response, and the fire safety systems are recorded separately, with an overall result of satisfactory, minor improvement needed, or major improvement needed. A cleared building can still need improvement.
How a drill is written up
- 1
Set the premises
Record the building, the evacuation strategy and how often this premises should be drilled.
- 2
Work the checks
Run the pre-drill, during-drill and post-drill list, and log what happened and when.
- 3
Write up what failed
Raise an observation from a failed check, or start one from notes. AI can turn those notes into a finding and an action.
- 4
Record the outcome
Draft the executive summary, record the four-part outcome, and export the PDF.
A notebook vs a drill report
Notebook and email
With AssessHub
The time to evacuate lives in someone’s notes
An event log with a time, an area and what happened
A locked door is mentioned once and then forgotten
A failed check becomes an observation on the action plan
The summary is written from memory the next day
The summary is drafted from the checks and the log
Nobody records whether the drill was satisfactory
Evacuation, response, systems and an overall result, with the reason written down
The next drill date is a guess
A recommended frequency: quarterly, six-monthly, yearly or two-yearly
Frequently asked questions
What is fire drill software?
Fire drill software records an evacuation drill as a structured report: the building and its evacuation strategy, checks made before, during and after the alarm, a timed log of what happened, and observations that become an action plan. AssessHub then drafts an executive summary from that record and exports a branded PDF.
How often should a fire drill be carried out?
There is no single interval in the Fire Safety Order. The responsible person decides how often a drill is needed for the premises and the people in it. AssessHub lets the assessor recommend quarterly, six-monthly, yearly or two-yearly, and prints that recommendation in the report.
What does the checklist cover?
Suggested checks before the drill (alarm receiving centre, panel, escape routes, assembly point, wardens, people who need assistance, roll call), during it (audibility, security locks, lifts, fire alarm, cause and effect, and whether staff followed the strategy) and after it (everyone accounted for, evacuation time, reset, and the debrief).
Does the AI decide whether the drill was satisfactory?
No. The assessor records evacuation completion, management and occupant response, the fire safety systems, and an overall result. The AI drafts the executive summary, and the wording of an observation, from the notes already on the drill. It is told not to invent times, headcounts, defects or a result.
Is fire drill reporting a separate subscription?
No. Fire drills sit in the Fire Safety module, on the same £100 assessor seat as fire risk assessment, fire door inspection and compartmentation surveys. Owners, office admins and QC reviewers do not consume a seat.
Write up the next drill in the same place as the FRA
Start a 14-day free trial and record a drill against a building you already assess — or book a demo and we will walk a report through with you.